S011: Motion and Quality in Healthcare
Room: Dockside 1
Chair(s): Hiroyasu Miwa, National Institute of Advanced Industrial Science and Technology (AIST), Japan

• Improving the palatability of nursing care food using a pseudo-chewing sound generated by an EMG signal
  Hiroshi Endo, Shuichi Ino, Waka Fujisaki, National Institute of Advanced Industrial Science and Technology (AIST), Japan
  
• Consideration of Conversation Support System between Elderly and Youth by Using Facial Expression Analysis
  Miyuki Iwamoto, Noriaki Kuwahara, Kazunari Morimoto, Kyoto Institute of Technology, Japan
  
• A Piano Lesson Method where User Plays the Piano Laying His or Her Hands on the Image of a Model Performer’s Hands
  Chika Oshima, Kimie Machishima, Katsuki Yamaguchi, Koichi Nakayama, Saga University, Japan
  
• Development of Musculoskeletal Model to Estimate Muscle Activities during Swallowing
  Takuya Hashimoto, Atsuko Murakoshi, The University of Electro-Communications, Japan; Takahiro Kikuchi, Yukihiro Michiwaki, Japanese Red Cross Musashino Hospital, Japan; Takuji Koike, The University of Electro-Communications, Japan
  
• Health Promotion Community Support for Vitality and Empathy: Visualize Quality of Motion (QoM)
  Takuichi Nishimura, Zilu Liang, Satoshi Nishimura, Tomoka Nagao, Satoko Okubo, National Institute of Advanced Industrial Science and Technology (AIST), Japan; Yasuyuki Yoshida, Tokyo Institute of Technology, Japan; Kazuya Imaizumi, Tokyo Healthcare University, Japan; Hisae Konosu, Japan Dance Sport Federation, Japan; Hiroyasu Miwa, National Institute of Advanced Industrial Science and Technology (AIST), Japan; Kanako Nakajima, Ken Fukuda, National Institute of Advanced Industrial Science and Technology (AIST), Japan
  
• Experimental Validation of a New Dynamic Muscle Fatigue Model
  Deep Seth, Damien Chablat, Sophie Sakka, Fouad Bennis, IRCCyN, Ecole Centrale de Nantes, France
  

Top

S030: Human Modeling for Quality Care
Room: Dockside 1
Chair(s): Noriaki Kuwahara, Kyoto Institute of Technology, Japan

• Exploring Risk-Benefit Factors of Electronic Clinical Pathways regarding Nursing Communication
  Tadashi Kanehira, Taro Sugihara, Okayama University, Japan; Muneou Suzuki, Miyazaki University, Japan; Akio Gofuku, Okayama University, Japan; Kenji Araki, Miyazaki Uniersity, Japan
  
• Implementation and Evaluation of Interactive Memory-Aid Agent Service for People with Dementia
  Seiki Tokunaga, Hiroyasu Horiuchi, Hiroki Takatsuka, Sachio Saiki, Shinsuke Matsumoto, Masahide Nakamura, Kobe University, Japan; Kiyoshi Yasuda, Chiba Rosai Hospital, Japan
  
• Videophone Conversation of Two Individuals with Dementia using an Anime Agent System
  Kiyoshi Yasuda, Chiba Rosai Hospital, Japan; Masao Fuketa, Kazuhiro Morita, Jun-ichi Aoe, University of Tokushima, Japan; Noriaki Kuwahara, Kyoto Institute of Technology, Japan
  
• Cognitive support for (semantic) dementia persons
  Akinori Abe, Chiba University, Japan
  
• Design of Face Tracking System using Environmental Cameras and Flying Robot for Evaluation of Health Care
  Veerachart Srisamosorn, The University of Tokyo, Japan; Noriaki Kuwahara, Kyoto Institute of Technology, Japan; Atsushi Yamashita, Taiki Ogata, Jun Ota, The University of Tokyo, Japan
  
• Towards Person-Centered Anomaly Detection and Support System for Home Dementia Care
  Kazunari Tamamizu, Seiki Tokunaga, Sachio Saiki, Shinsuke Matsumoto, Masahide Nakamura, Kobe University, Japan; Kiyoshi Yasuda, Chiba Rosai Hospital, Japan
  

Top

S048: Human Modeling of Traditional Arts and Technologies
Room: Dockside 1
Chair(s): Akihiko Goto, Osaka Sangyo University, Japan

• Analysis of the thought process for choosing a suitable kimono for a customer by an expert
  Kumiko Komizo, Noriaki Kuwahara, Kazunari Morimoto, Kyoto Institute of Technology, Japan; Takashi Furukawa, Hishiken Co. ltd., Japan
  
• Changes in Perception of Induced Motion Based on Voluntary Eye Movements in an Attentional Task
  Akihisa Hosoya, Tokyo Denki University, Japan; Hiroto Inoue, Advanced Institute of Industrial Technology, Japan; Nobuji Tetsutani, Tokyo Denki University, Japan
  
• Setting the Degree of Defocus for Video Images in a Monitoring System
  Yukiya Horie, Nobuji Tetsutani, Tokyo Denki University, Japan
  
• A study of eye movement analysis for investigating learning efficiency by using a highlighter pen
  Hiroki Nishimura, Kazumasa Shibata, Yuki Inazuka, Noriaki Kuwahara, Kyoto Institute of Technology, Japan
  
• A Fundamental Study on Differences in Heart Rates During Creative Work and Non-creative Work
  Tatsuo Nakagawa, Hiroto Inoue, Shigeomi Koshimizu, Advanced Institute of Industrial Technology, Japan
  
• Analyzing the Difference between Floral Materials Water Potential when Cut by Ikebana Experts and Inexperienced Persons
  Yuki Ikenobo, Ikenobo, Japan; Yuko Hanba, Noriaki Kuwahara, Kyoto Institute of Technology, Japan; Akihiko Goto, Osaka Sangyo University, Japan
  

Top

S069: Science of Omotenashi: Investigating the spirit of selfless hospitality
Room: Dockside 1
Chair(s): Tomoko Ota, Chuo Business Group, Japan

• A Comparative Study of Instructing Methods regarding Japanese Bowing
  Tomoya Takeda, Kyoto Institute of Technology, Japan; Yuko Kamagahara, Andsmile, Japan; Xiaodan Lu, Noriyuki Kida, Kyoto Institute of Technology, Japan; Tadayuki Hara, University of Central Florida, Japan; Tomoko Ota, Chuo Business Group, Japan
  
• Eye Movement Analysis for Expert and Non-Expert in Japanese Traditional Culture of Tea Ceremony - From the View Point of Japanese Hospitality, “Omotenashi”-
  Tomoya Takeda, Kyoto Institute of Technology, Japan; Yuki Miyamoto, Chuou Business Group, Japan; Xiaodan Lu, Kyoto Institute of Technology, Japan; Kayo Okuhira, Chuo Business Group, Japan; Noriyuki Kida, Kyoto Institute of Technology, Japan; Tomoko Ota, Chuo Business Group, Japan
  
• The Perception of the Beneficiary for Japanese Bowing in Different Situations at the Reception
  Tomoya Takeda, Kyoto Institute of Technology, Japan; Yuko Kamagahara, Andsmile, Japan; Xiaodan Lu, Noriyuki Kida, Kyoto Institute of Technology, Japan; Tadayuki Hara, University of Central Florida, Japan; Yoichiro Ogura, Kyoto Institute of technology, Japan; Tomoko Ota, Chuo Business Group, Japan
  
• Quantitative Analysis of the Customer Satisfaction at the Dental Clinic
  Yuko Kamagahara, Andsmile, Japan; Tomoya Takeda, Kyoto Institute of Technology, Japan; Shanshan Jin, Kyoto Institute of Technology, P.R. China; Xiaodan Lu, Kyoto Institute of Technology, Japan; Tomoko Ota, Chuo Business Group, Japan; Tadayuki Hara, University of Central Florida, Japan; Noriyuki Kida, Kyoto Institute of Technology, Japan
  
• Research on the motion technique of Japanese tea ceremony
  Soutatsu Kanazawa, Urasenke Konnichian Tea workshop, Japan; Zelong Wang, Kyoto Institute of Technology, P.R. China; Yuka Takai, Akihiko Goto, Osaka Sangyo University, Japan; Tomoko Ota, Chuo Business Group, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan
  
• Analysis of CS survey and NPS numbers in Japanese Wedding market
  Shigeyuki Takami, Takami Bridal Co., Ltd., Japan; Nobuyuki Kitada, Kyoto Institute of Technology, Japan; Tomoko Ota, Chuo Business Group, Japan
  

Top

S087: Traditional Wisdom and Technologies in Industry
Room: Dockside 1
Chair(s): Hiroyuki Hamada, Kyoto Institute of Technology, Japan

• Process analysis of expert and non-expert engineers in quartz glass bending process
  Masamichi Suda, Kyoto Institute of Technology, Japan; Toru Takahashi, Akio Hattori, TECHNO-EYE CORPORATION, Japan; Akihiko Goto, Osaka Sangyo University, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan
  
• The Difference in Micro-Deburring Finish Produced by Groove Cutting Method
  Mitsunori Mori, Tatsuro Nagasuna, Tango-Giken Co., Ltd., Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan
  
• An investigation on skillful techniques and quantified instructional tool on spray-up fabrication method for large-scale composite panel
  Tetsuo Kikuchi, Toyugiken Co., Ltd., Japan; Erika Suzuki, Kyoto Institute of Technology, Japan
  
• The Analysis of Polishing Process of Cold Forging Die in Axial Symmetric Form and Axial Non-Symmetric Form
  Hidehito Kito, Hiroyuki Nishimoto, Kyoto Institute of Technology, Japan; Akihiko Goto, Yuka Takai, Osaka Sangyo University, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan
  
• Difference of Proficiency in Wooden Tub Manufacturing
  Shuhei Yasuda, Keisuke Ono, Ryo Takematsu, Kyoto Institute of Technology, Japan; Mayuko Toyooka, Masakazu Aoshima, Takeshi Ueshiba, Fujii Barrel Manufucturing, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan
  
• Study on braiding skills by comparing between expert and non-experts with eye’s movement measurement
  Kontawat Chottikampon, Suchalinee Mathurosemontri, Kyoto Institute of Technology, Thailand; Hitoshi Marui, Porakoch Sirisuwan, Kyoto Institute of Technology, Japan; Akihiko Goto, Osaka Sangyo University, Japan; Tadashi Uozumi, Gifu University, Japan; Miyako Inoda, Hiroyuki Nishimoto, Hiroyuki Hamada, Kyoto Institute of Technology, Japan
  

Top

S107: Focus on the Human in DHM
Room: Dockside 1
Chair(s): Vincent G. Duffy, Mihaela Vorvoreanu, Purdue University, United States

• Designing for STEM Faculty: The Use of Personas for Evaluating and Improving Design
  Mihaela Vorvoreanu, Krishna Madhavan, Kanrawi Kitkhachonkunlaphat, Liang Zhao, Purdue University, United States
  
• Physicians' code of conduct and further requirements for a productive patient physician relationship exemplified in the area of orthognathic surgery
  Luisa Vervier, Martina Ziefle, RWTH Aachen University, Germany
  
• Modern human-robot interaction in smart services and value co-creation
  Vincent G. Duffy, Purdue University, United States
  
• AtHoCare: An Intelligent Elder Care at Home System
  Tao Xu, Northwestern Polytechnical University, P.R. China; Yun Zhou, Shaanxi Normal University, P.R. China; Zhe Ma, Northwestern Polytechnical University, P.R. China
  
• MEDEDUC: An Educational Medical Serious Game
  Vitor Manuel Fragoso Ferreira, Rosa Maria E. Moreira da Costa, Vera M.B. Werneck, Universidade do Estado do Rio de Janeiro, Brazil
  
• Redesign Based on Card Sorting: How Universally Applicable Are Card Sort Results?
  Jobke Wentzel, Nienke Beerlage de Jong, Thea Van der Geest, University of Twente, Netherlands
  
• Integrating Human Factors in Information Systems Development: User Centred and Agile Development Approaches
  Leonor Teixeira, Vasco Saavedra, Beatriz Sousa Santos, Carlos Ferreira, University of Aveiro, Portugal
  

Top

S127: Utilizing Traditional Wisdom and Technologies for Quality Care
Room: Dockside 1
Chair(s): Noriyuki Kida, Kyoto Institute of Technology, Japan

• Assessing the Use of Communication Robots for Recreational Activities at Nursing Homes Based on Dementia Care Mapping (DCM)
  Teruko Doi, Noriaki Kuwahara, Kazunari Morimoto, Kyoto Institute of Technology, Japan
  
• The Transfer of Expertise in Conducting a Participatory Music Therapy during a Combined Rehabilitation-Recreational Program in an Elderly Care Facility
  Akiyoshi Yamamoto, Super Court Co., Ltd, Japan; Henry Jr Cereno Barrameda, Super Court Co,. Ltd, Japan; Tatsunori Azuma, Hideaki Kasasaku, Kayoko Hirota, Momo Jinno, Maki Sumiyama, Super Court Co., Ltd, Japan; Tomoko Ota, Chuo Business Group, Japan; Akihiko Goto, Osaka Sangyo University, Japan; Noriyuki Kida, Noriaki Kuwahara, Hiroyuki Hamada, Kyoto Institute of Technology, Japan
  
• Movement Analysis of Transfer Assistance Using a Slide Board
  Xiaodan Lu, Kyoto Institute of Technology, Japan; Mengyuan Liao, Zelong Wang, Kyoto Institute of Technology, P.R. China; Yuki Miyamoto, Chuou Business Group, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan; Tomoko Ota, Chuo Business Group, Japan; Kengo Yano, Yoshihiko Tokumoto, Tokubetuyougorouzinhomunanohana, Japan; Takashi Yoshikawa, National Institute of Technology, Niihama College, Japan; Yuka Takai, Akihiko Goto, Osaka Sangyo University, Japan
  
• Comparative Study of Design and Type of Work When Assembling Cardboard Beds for Shelters
  Yoshihiro Mizutani, J. Packs co., Ltd., Japan; Naoya Yamada, Noriaki Kuwahara, Kazunari Morimoto, Hiroyuki Hamada, Kyoto Institute of Technology, Japan
  
• Exploring Rhythmic Patterns in Dance Movements by Video Analysis
  Camilo Arguello, Marcela Iregui, Nueva Granada Mil. University, Colombia
  

Top

S145: Future Applied Conventional Technology
Room: Dockside 1
Chair(s): Yuka Takai, Akihiko Goto, Osaka Sangyo University, Japan

• A Study on Development of a Wide Elegant Textile by Using Japanese Traditional Textile Technology of Nishijin-Ori
  Masashi Kano, Hiro Akaji, Akiko Kato, Kano-ko Co., Ltd., Japan; Noriaki Kuwahara, Kyoto Institute of Technology, Japan
  
• Performance Analysis of Professional Sewing Scissors using the “So-hizukuri” Forging Process
  Yasuko Kitajima, Tokyo Ariake University of Medical and Health Sciences, Japan; Akihiko Goto, Osaka Sangyo University, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan
  
• A Comparison of Processing Time and Strike Position between Experts and Non-experts of Sheet-metal Repair
  Shigeru Ikemoto, Hiroyuki Hamada, Kyoto Institute of Technology, Japan; Yuka Takai, Osaka Sangyo University, Japan
  
• The Load Measurement of the Beating Brush in the Second Lining Procedure
  Yasuhiro Oka, Kyoto Institute of Technology, Japan; Yuka Takai, Akihiko Goto, Osaka Sangyo University, Japan; Kozo Oka, Kyoto Institute of Technology, Japan
  
• Comparison Knitting Skills between Experts and non-Experts by Measurement of the Fabric Quality
  Kontawat Chottikampon, Kyoto Institute of Technology, Thailand; Shunyu Tang, Kyoto Institute of Technology, Japan; Suchalinee Mathurosemontri, Kyoto Institute of Technology, Thailand; Porakoch Sirisuwan, Miyako Inoda, Hiroyuki Nishimoto, Hiroyuki Hamada, Kyoto Institute of Technology, Japan
  

Top

S161: DHM in medicine
Room: Dockside 1
Chair(s): Caterina Rizzi, University of Bergamo, Italy

• Combination of non invasive medical imaging technologies and Virtual Reality systems to generate immersive fetal 3D visualizations
  Jorge Roberto Lopes dos Santos, Pontifícia Universidade Católica do Rio de Janeiro (PUC-Rio), Brazil; Heron Werner, Clinica de Diagnostico por Imagem, Brazil; Gerson Ribeiro, Simone Belmonte, Pontifícia Universidade Católica do Rio de Janeiro (PUC-Rio), Brazil
  
• Computational Modeling for Simulating Obstructive Lung Diseases based on Geometry Processing Methods
  Stavros Nousias, Aris S. Lalos, Konstantinos Moustakas, University of Patras, Greece
  
• The ten characteristics of the critical task: Ergonomic analysis of vitality requirements in aortic valve surgery
  René Patesson, Université Libre de Bruxelles, Belgium; Eric Brangier, Université de Lorraine, France
  
• Bone Structure Monitoring Systems Applied to Physiotherapy of Children with Cerebral Palsy
  Danilo Saravia, Universidad del Azuay, Ecuador; Victor M. Gonzalez, 2Instituto Tecnologico Autonomo de Mexico, Mexico
  
• Visual Representation of Dynamic Pressure Map on the Digital Human Model of Patient with a Lower Limb Prosthesis
  Giorgio Colombo, Politecnico di Milano, Italy; Claudio Comotti, Daniele Regazzoni, Caterina Rizzi, Andrea Vitali, University of Bergamo, Italy
  
• Interactive gestures for liver angiography operation
  Dina A. Elmanakhly, Suez Canal University, Egypt; Ayman Atia, Helwan University, Egypt; Essam A. Rashed, Suez Canal University, Egypt; Mostafa-Samy M. Mostafa, Helwan University, Egypt
  

Top

S181: DHM for design and ergonomics
Room: Dockside 1
Chair(s): Caterina Rizzi, University of Bergamo, Italy

• The Study of Design of Children's Anti-lost Clothing based upon Ergonomics
  Xiaoping Hu, Jiying Zhong, South China University of Technology, P.R. China
  
• Research on the comfortable and maximum pedaling forces of Chinese population
  Huiyu Luo, Beihang University, P.R. China; Chang Liu, Pan-Asia Technical Automotive Center Co. Ltd., P.R. China; Jing Zhang, Qing Ye, Li Ding, Beihang University, P.R. China
  
• Study on Somatotype Characteristics and Differences of Female Youth from Liaoning Province and Guangdong Province in China
  Xiaoping Hu, Jing Zhou, South China University of Technology, P.R. China
  
• Experimental Study on Discrimination Thresholds for Haptic Perception of Size in Manual Operation
  Ai-ping Yang, Guang Cheng, Beijing Union University, Hong Kong; Wenyu Fu, Beijing Union University, P.R. China; Hui-min Hu, Xin Zhang, China National Institute of Standardization, P.R. China; Chau-Kuang Chen, Meharry Medical College, United States
  
• Automatic below-knee prosthesis socket design: a preliminary approach
  Giorgio Colombo, Politecnico di Milano, Italy; Giancarlo Facoetti, Caterina Rizzi, University of Bergamo, Italy
  

Top

S197: Advances in DHM and related applications
Room: Dockside 1
Chair(s): Pingbo Tang, Arizona State University, United States

• Experimental Research of Range of Motion about Wrist Joint
  Wenyu Fu, Beijing Union University, P.R. China; Guang Cheng, Yufeng Ma, Ai-ping Yang, Beijing Union University, Hong Kong
  
• Constructing a Decision-Support System for Safe Ship-Navigation Using a Bayesian Network
  Ruolan Zhang, Kobe university, Japan; Masao Furusho, Kobe University, Japan
  
• A novel visualization environment to support modelers in analyzing data generated by cellular automata
  Philippe J. Giabbanelli, Guru Jagadeesh Babu, Magda Baniukiewicz, Northern Illinois University, United States
  
• Introducing a Language for Human Stance Description
  Antonio C. Mabiala, Universidade de São Paulo, Brazil; Antonio W. Sousa, São Paulo Faculty of Technology, Brazil; Norton T. Roman, João L. Bernardes Jr., Universidade de São Paulo, Brazil; Marcelo M. Antunes, Enrique M. Ortega, Central Kung Fu Academy, Brazil; Luciano A. Digiampietri, Universidade de São Paulo, Brazil; Luis M.del Val Cura, Campo Limpo Paulista Faculty, Brazil; Valdinei F. Da Silva, Clodoaldo A.M. Lima, Universidade de São Paulo, Brazil
  
• [Presentation Canceled] The research of Airport Operational Risk Alerting Model
  Mei Rong, Min Luo, Yan Qiu Chen, China Academy of Civil Aviation Science and Technology, P.R. China
  
• Automatic Imagery Data Analysis for Diagnosing Human Factors in the Outage of a Nuclear Plant
  Pingbo Tang, Cheng Zhang, Arizona State University, United States; Alper Yilmaz, The Ohio State University, United States; Nancy J. Cooke, Arizona State University, United States; Ronald Laurids Boring, Idaho National Laboratory, United States; Allan Chasey, Arizona State University, United States; Timothy Vaughn, Samuel Jones, Palo Verde Nuclear Generation Station, United States; Ashish Gupta, The Ohio State University, United States; Verica Buchanan, Arizona State University, United States
  

Top